Coats 12.000 lb. Red 2 Post 2N1

Coats 12.000 lb. Red 2 Post 2N1

Features

• 2N1 Model: Easy access to approved lift points with 3 piece offset front & rear lifting arms for asymmetric and symmetric loading with reinforced carriage arm pin holes and plated gear style arm restraints.
• Non Fatigue Cables & Pulleys: 3/8″ Non Fatigue Cables with 3.5″ Pulleys that are double the lifespan of plastic pulleys, making your lift last longer with less maintenance.
• Tube Column Reinforcement: The 2.5” x 1.5” inner tube support lets heavier columns flex less under load.
• US Made Power Units That Last: The energy efficient US Made Bucher 2HP power unit typically lasts the life of the lift with a single point lock release and rubber motor mounts to reduce motor noise.

Specifications

Model  12K 2N1  Capacity  12,000 lb/5.5 T  ALI Certification  Yes A  Overall Height  158 7/8” (4,035 mm)  Extended Height  N/A B  Overall Width  137 1/8” (3,483 mm) C  Width Between Columns  109 3/4” (2,788 mm) D  Drive Thru Width  89 1/8” (2,264 mm) E  Under Bar Clearance  153 1/2” (3,899 mm) F  Lowered Height (standard pad fully in)  3-3/4” (102 mm) G  Raised Height (standard pad fully out)  77” (1,958 mm) H  Raised Height (with extensions)  86” (2,184 mm) I  Front Arm Reach  19 3/8”- 42” (492 mm-1,067 mm) J  Rear Arm Reach  36 1/4”- 61 5/8” (921 mm-1,565 mm)    Lifting Time  75 seconds  Standard Power Requirements  230 V, 1PH, 60Hz, 20A

Downloads

Manual

Flyer

General Warranty

 Click here for download